INDEXED IN MEDLINE
Food Science and Technology International (FSTI) is a highly ranked, peer-reviewed scholarly journal publishing high-quality articles by leading researchers of food science and technology, covering:
- food processing and engineering
- food safety and preservation
- food biotechnology
- chemical, physical and sensory properties of foods
Published eight times per year with additional features such as critical reviews and brief scientific notes that provide essential information from food scientists throughout the world.
All issues of the Food Science & Technology are available to browse online.
Food Science and Technology International (FSTI) is a highly ranked, peer reviewed scholarly journal publishing high-quality articles by leading researchers of food science and technology, covering:
- food processing and engineering
- food safety and preservation
- food biotechnology
- chemical, physical and sensory properties of foods
Published with additional features such as critical reviews, brief scientific notes, that provide essential information from food scientists throughout the world.
|Antonio Martínez López||IATA-CSIC, Spain|
|Jose Javier Benedito||Universtiat Politècnica de Valencia, Spain|
|Concha Collar||IATA-CSIC, Spain|
|Matteo Crotta||The Royal Veterinary College, University of London, UK|
|Tatiana Koutchma||Agriculture and Agri-Food Canada, Canada|
|Vicente Monedero||IATA-CSIC, Spain|
|Remedios Melero||IATA-CSIC, Spain|
|Teresa Sanz Taberner||IATA-CSIC, Spain|
|Lorenzo Zacarías||IATA-CSIC, Spain|
|Jose Miguel Aguilera||Pontificia Universidad Catolica de Chile, Chile|
|Stella Maris Alzamora||Universidad De Buenos Aires, Argentina|
|Gustavo V Barbosa-Canovas||Washington State University, USA|
|Elvira Costell||Instituto de Agroqummica y Tecnologma de Alimentos, Spain|
|Luis Cunha||Universdade do Porto, Portugal|
|T.Romen Gormley||The National Food Centre Dunsinea, Ireland|
|Jean Xavier Guinard||University of California Davis, USA|
|Richard W. Hartel||University of Wisconsin, Madison, USA|
|Manuela Juárez||Instituto del Frio, (CSIC), Spain|
|Franco M.Lajolo||Universidad de São Paolo, Brazil|
|Michele Marcotte||Agriculture and Agri-Food Canada Food Res. & Dev. Center, Canada|
|Wenceslao Moreda Martino||Instituto de la Grasa. CSIC, Spain|
|Antonio Mulet||Universidad Politécnica de Valencia, Spain|
|Octavio Paredes-López||Centro de Investigacion y de Estodies Avanzados del IPN, Mexico|
|Micha Peleg||University of Massachusetts, USA|
Manuscript Submission Guidelines: Food Science and Technology International
This Journal is a member of the Committee on Publication Ethics.
This Journal recommends that authors follow the Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals formulated by the International Committee of Medical Journal Editors (ICMJE).
Please read the guidelines below then visit the Journal’s submission site http://mc.manuscriptcentral.com/fsti to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned.
Only manuscripts of sufficient quality that meet the aims and scope of Food Science and Technology International will be reviewed.
There are no fees payable to submit or publish in this journal.
As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you.
If you have any questions about publishing with SAGE, please visit the SAGE Journal Solutions Portal
- What do we publish?
1.1 Aims & Scope
1.2 Article types
1.3 Writing your paper
- Editorial policies
2.1 Peer review policy
2.5 Declaration of conflicting interests
2.6 Research ethics and patient consent
2.7 Clinical trials
2.8 Reporting guidelines
- Publishing policies
3.1 Publication ethics
3.2 Contributor's publishing agreement
3.3 Open access and author archiving
- Preparing your manuscript
4.2 Artwork, figures and other graphics
4.3 Supplementary material
4.4 Reference style
4.5 English language editing services
- Submitting your manuscript
5.2 Information required for completing your submission
- On acceptance and publication
6.1 SAGE Production
6.2 Online First publication
6.3 Access to your published article
6.4 Promoting your article
- Further information
Before submitting your manuscript to Food Science and Technology International, please ensure you have read the Aims & Scope.
Published six times a year, Food Science and Technology International is a highly ranked, peer reviewed scholarly journal publishing high-quality articles by leading researchers of food science and technology, covering:
food processing engineering · composition · safety · nutritional quality · biotechnology · quality · physical properties · microstructure · microbiology · packaging · sensory analysis, bioprocessing · postharvest technology
In addition, the journal publishes critical reviews, book reviews, brief scientific notes, and coverage of international congresses
Manuscripts dealing with science and technology of food and beverages will be considered for publication in Food Science and Technology International.
Manuscripts are considered for publication with the understanding that they have not been published previously and are not under consideration by another publication.
The journal publishes original papers, research correspondence and scientific clinical reviews.
The maximum article word length is 5000 words, though review articles that are longer than 5000 words will still be considered for publication.
All submissions should be written in a clear and succinct manner, following the style of the journal.
Title should be centred and brief, followed by centred name, affiliation, address, country, and postal code (zip) of author(s). Indicate to whom correspondence and proofs should be sent, including a telephone number, fax number and e-mail address.
Research Papers include a 200-word abstract, keywords, an Introduction, Materials and Methods, Results and Discussion and References.
Reviews of a scientific or applied field should include all major findings and bring together reports from a number of sources. A brief extract (about 200 words) should be given and references must be in the form shown below.
Notes should be used to report either important preliminary findings or results that do not require a full research article. An abstract of about 100 words or less is required.
The SAGE Author Gateway has some general advice and on how to get published, plus links to further resources.
1.3.1 Make your article discoverable
When writing up your paper, think about how you can make it discoverable. The title, keywords and abstract are key to ensuring readers find your article through search engines such as Google. For information and guidance on how best to title your article, write your abstract and select your keywords, have a look at this page on the Gateway: How to Help Readers Find Your Article Online
The journal's policy is to obtain at least two independent reviews of each article. It operates a double-blind reviewing policy in which the reviewer’s name is always concealed from the submitting author; authors may choose to reveal their name but the journal otherwise leaves the article anonymous. Referees will be encouraged to provide substantive, constructive reviews that provide suggestions for improving the work and distinguish between mandatory and non-mandatory recommendations.
All manuscripts accepted for publication are subject to editing for presentation, style and grammar. Any major redrafting is agreed with the author but the Editor's decision on the text is final.
If you are asked to provide the names of a peer who could be called upon to review your manuscript, please note that reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Please be aware of any conflicts of interest when recommending reviewers. Examples of conflicts of interest include (but are not limited to) the below:
- The reviewer should have no prior knowledge of your submission
- The reviewer should not have recently collaborated with any of the authors
- Reviewer nominees from the same institution as any of the authors are not permitted
Please note that the journal’s editors are not obliged to invite any recommended/opposed reviewers to assess your manuscript.
Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.
The list of authors should include all those who can legitimately claim authorship. This is all those who:
- Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
- Drafted the article or revised it critically for important intellectual content,
- Approved the version to be published,
- Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.
Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.
Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.
2.3.1 Third party submissions
Where an individual who is not listed as an author submits a manuscript on behalf of the author(s), a statement must be included in the Acknowledgements section of the manuscript and in the accompanying cover letter. The statements must:
- Disclose this type of editorial assistance – including the individual’s name, company and level of input
- Identify any entities that paid for this assistance
- Confirm that the listed authors have authorized the submission of their manuscript via third party and approved any statements or declarations, e.g. conflicting interests, funding, etc.
Where appropriate, SAGE reserves the right to deny consideration to manuscripts submitted by a third party rather than by the authors themselves.
Please supply any personal acknowledgements separately to the main text to facilitate anonymous peer review.
2.3.2 Writing assistance
Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance. It is not necessary to disclose use of language polishing services.
Food Science and Technology International requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the SAGE Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
It is the policy of Food Science and Technology International to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.
Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’. For guidance on conflict of interest statements, please see the ICMJE recommendations here.
Medical research involving human subjects must be conducted according to the World Medical Association Declaration of Helsinki.
Submitted manuscripts should conform to the ICMJE Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals, and all papers reporting animal and/or human studies must state in the methods section that the relevant Ethics Committee or Institutional Review Board provided (or waived) approval. Please ensure that you have provided the full name and institution of the review committee, in addition to the approval number.
For research articles, authors are also required to state in the methods section whether participants provided informed consent and whether the consent was written or verbal.
Information on informed consent to report individual cases or case series should be included in the manuscript text. A statement is required regarding whether written informed consent for patient information and images to be published was provided by the patient(s) or a legally authorized representative.
Please also refer to the ICMJE Recommendations for the Protection of Research Participants.
All research involving animals submitted for publication must be approved by an ethics committee with oversight of the facility in which the studies were conducted. The journal has adopted the Consensus Author Guidelines on Animal Ethics and Welfare for Veterinary Journals published by the International Association of Veterinary Editors.
Food Science and Technology International conforms to the ICMJE requirement that clinical trials are registered in a WHO-approved public trials registry at or before the time of first patient enrolment as a condition of consideration for publication. The trial registry name and URL, and registration number must be included at the end of the abstract.
The relevant EQUATOR Network reporting guidelines should be followed depending on the type of study. For example, all randomized controlled trials submitted for publication should include a completed CONSORT flow chart as a cited figure and the completed CONSORT checklist should be uploaded with your submission as a supplementary file. Systematic reviews and meta-analyses should include the completed PRISMA flow chart as a cited figure and the completed PRISMA checklist should be uploaded with your submission as a supplementary file. The EQUATOR wizard can help you identify the appropriate guideline.
Other resources can be found at NLM’s Research Reporting Guidelines and Initiatives.
SAGE acknowledges the importance of research data availability as an integral part of the research and verification process for academic journal articles.
Food Science and Technology International requests all authors submitting any primary data used in their research articles to be published in the online version of the journal, or provide detailed information in their articles on how the data can be obtained. This information should include links to third-party data repositories or detailed contact information for third-party data sources. Data available only on an author-maintained website will need to be loaded onto either the journal’s platform or a third-party platform to ensure continuing accessibility.
Examples of data types include but are not limited to statistical data files, replication code, text files, audio files, images, videos, appendices, and additional charts and graphs necessary to understand the original research. The editor may consider limited embargoes on proprietary data. The editor can also grant exceptions for data that cannot legally or ethically be released. All data submitted should comply with Institutional or Ethical Review Board requirements and applicable government regulations. For further information, please contact the editorial office at email@example.com .
SAGE is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the SAGE Author Gateway.
Food Science and Technology International and SAGE take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarised other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.
3.1.2 Prior publication
If material has been previously published it is not generally acceptable for publication in a SAGE journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the SAGE Author Gateway or if in doubt, contact the Editor at the address given below.
Before publication, SAGE requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. SAGE’s Journal Contributor’s Publishing Agreement is an exclusive licence agreement which means that the author retains copyright in the work but grants SAGE the sole and exclusive right and licence to publish for the full legal term of copyright. Exceptions may exist where an assignment of copyright is required or preferred by a proprietor other than SAGE. In this case copyright in the work will be assigned from the author to the society. For more information please visit the SAGE Author Gateway.
Food Science and Technology International offers optional open access publishing via the SAGE Choice programme. For more information please visit the SAGE Choice website. For information on funding body compliance, and depositing your article in repositories, please visit SAGE Publishing Policies on our Journal Author Gateway.
The preferred format for your manuscript is Word. LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.
For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit SAGE’s Manuscript Submission Guidelines.
Figures supplied in colour will appear in colour online regardless of whether or not these illustrations are reproduced in colour in the printed version. For specifically requested colour reproduction in print, you will receive information regarding the costs from SAGE after receipt of your accepted article.
This journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplementary files
Food Science and Technology International adheres to the SAGE Harvard reference style. View the SAGE Harvard guidelines to ensure your manuscript conforms to this reference style.
Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using SAGE Language Services. Visit SAGE Language Services on our Journal Author Gateway for further information.
Food Science and Technology International is hosted on SAGE Track, a web based online submission and peer review system powered by ScholarOne™ Manuscripts. Visit http://mc.manuscriptcentral.com/fsti to login and submit your article online.
IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the journal in the past year it is likely that you will have had an account created. For further guidance on submitting your manuscript online please visit ScholarOne Online Help.
As part of our commitment to ensuring an ethical, transparent and fair peer review process SAGE is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a unique and persistent digital identifier that distinguishes researchers from every other researcher, even those who share the same name, and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities, ensuring that their work is recognized.
The collection of ORCID iDs from corresponding authors is now part of the submission process of this journal. If you already have an ORCID iD you will be asked to associate that to your submission during the online submission process. We also strongly encourage all co-authors to link their ORCID ID to their accounts in our online peer review platforms. It takes seconds to do: click the link when prompted, sign into your ORCID account and our systems are automatically updated. Your ORCID iD will become part of your accepted publication’s metadata, making your work attributable to you and only you. Your ORCID iD is published with your article so that fellow researchers reading your work can link to your ORCID profile and from there link to your other publications.
You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).
Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the SAGE Author Gateway.
Your SAGE Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be sent by PDF to the corresponding author and should be returned promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate. Please note that if there are any changes to the author list at this stage all authors will be required to complete and sign a form authorising the change.
Online First allows final articles (completed and approved articles awaiting assignment to a future issue) to be published online prior to their inclusion in a journal issue, which significantly reduces the lead time between submission and publication. Visit the SAGE Journals help page for more details, including how to cite Online First articles.
SAGE provides authors with online access to their final article.
Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The SAGE Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice.
Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the Food Science and Technology International editorial office as follows:
US/Canada Gustavo V. Barbosa-Canovas, Washington State University Food Engineering Program, Pullman, WA 99164-6120, USA. Email: firstname.lastname@example.org
Europe Remedios Melero, Managing Editor, Food Science and Technology International, PO Box 73, 46100 Burjasot, Valencia, Spain. Email: email@example.com